Neat & Tangled Throwdown: Making Your Own Cover Plate with Small Dies!!!

Hey, crafty peeps!  Today I decided to participate in the Neat & Tangled Throwdown which happens to be a tutorial challenge!

I love creating tutorial style blog posts and I try to do them often. I actually do have a You Tube channel but I'm very bad at it!  If you're so inclined, you can check it out HERE :)  

I decided to create my own cover plate style card front using small dies.  This is a fun and easy technique although a bit time consuming.  Now, I say time consuming because I did run into a slight problem that haunted me through the entire process, which I'll share with you a bit later!

I wanted to get a fairly symmetrical look to the die cutting so I started by dividing my 4.25 X 5.5 inch piece of cardstock into 4 equal sections.

So, 2 1/8 on the short side and 2.75 on the long side.  I chose the Medallion Flower Builder Nice and Neat Dies for the die cutting.  These dies are the perfect size and shape to make an entire background.

I lined up the largest die at the corner where the 2 lines intersect. It snuggled it perfectly there!  And I made sure the smaller leaf was centred over one of the lines. Now, as I looked at this, I thought to myself "you'll never line this up the same every time". So, I sat there until it came to me. Adhere the dies together so they can be moved as one piece!!  Great idea. Executed poorly. This is the beginning of the problem that followed me to the end of this card.

I decided to use Press N' Seal.  This stuff works great for moving around die cuts, however not so good for actual die cutting. Yes, this stuff held the dies beautifully! It did not tear the cardstock at all. But....every time I ran it through, it left a bit of whatever it is that makes it sticky on the cardstock.  I didn't think it was a big deal because it seemed to come off easily with a white eraser, so I kept going.  But even as I would erase, it would just reappear later on.  TIP: Use a low tack painters tape or 3M Post It Tape for this!!

See what I mean?  Even cat hair stuck to it, hahah!!  The positive of using the Press N' Seal was that it was transparent so it was easy to place the dies where they needed to go.  

All you have to do is turn the cardstock and place the dies in all four corners, making sure to line up the top leaf with the pencil line!  

This was the first four cuts.  I felt like there were a few places that were too "empty" so I added a couple more dies and this time used 3M Pore Tape to adhere them.

I should mention that I did keep all the positive die cuts.  These will make our faux cover die look more intricate!

I trimmed the panel down to 3.5 X 5 inches.  At this point, I wasn't super impressed with how this was looking so I set it aside...for a day. When I got back to it today, I knew what I wanted to do. Ink blending with Distress Oxides!!  I chose three colours but ended up only using one, my favourite of all time..Crushed Olive!

And of course no ink blended panel would be complete without water splatters!

I used regular white cardstock for this, not watercolour paper.  Works great but you can't overdo it with the water or your paper will start to disintegrate!  I did dry this with my heat tool but was able to give it an extra few minutes because I had yet to do the most tedious part of this whole process...apply foam tape!!

Ugh, I know! But it was well worth the effort!!  Once that was adhered to the ink blended panel (which was also cut to the same dimensions of the die cut panel), it was time to adhere some of the positive die cuts back into place.

My preferred adhesive for things like this is Glossy Accents.  Not sure why cause it can be messy but you can't beat the hold of this stuff!!

Okay, folks. We're almost there!  Time to place a few clear sequins (which kind of evened out the design a bit),

And stamp the sentiment!

I used one of the greeting from the Scandinavian Prints Stamp Set and stamped it onto a die cut banner.  The white banner needed a bit of definition from the white die cut panel so I layered it up with a light grey one! This just so happens to be the same grey cardstock I used for the base!

And here (finally) is the finished card...

This really is an easy card to make IF you don't use Press N' Seal. Live and learn, right?!

Thank you so, so much for hanging in there with me for this one! I hope I was able to inspire you to maybe give this a try!!  I know I'll be trying this again!

Until next...stay crafty!!

Laurie

Giving the World a Big Hug!

Hi everyone!!  Have you ever been drifting off to sleep and you suddenly get an idea for a card??  That's what happened the other night and this is what became of that idea...

I recently got my hands on the Big Hugs die from Neat and Tangled.  This is a fantastic die. Great font and a great size!!  My sleepy idea started with some inlay die-cutting, then masking, then ink blending.

I started by stamping then world map from the Origami Map onto a piece of 4.25X5.5 white cardstock in Memento Tuxedo Black Ink using my Misti, of course!!  Then I simply used the Co-ordinating Die on a piece of plain, pink typing paper.  I used both the positive and negative pieces.

I placed the negative piece over the stamped image and used May's Shades of Pink, starting with the darkest shade south of the equator (Raspberry Jam) and worked my way up to Soft Pink.

Next, I placed the positive piece of my mask over the ink blended world and lightly blended some Mountain Mist from the Sea Shore Mini Ink Cube set from Altenew.

After all the masking and blending, I used the largest of the Wonky Stitched Rectangles from MFT to cut down the panel.  I centred the Big Hugs Die in the middle of the map and die cut that as well.  To add some dimension, I cut two more out of black cardstock.  Then it was time to place the puzzle back together. I added some Spectrum Noir Clear Sparkle Overlay Marker to the continents and a TON of Glossy Accents to the Big Hugs!!

And this, my friends, is what kept me up...

Thank you SO much for taking the time to stop by!

Hugs to YOU...

Laurie